Flow Instruments
Reeshar Control Systems designs, manufactures, distributes, supplies and wholesales different kinds of Flow Instruments such as Magnetic, Ultrasonic, Rotameter, Glass Tube, Acrylic, Flow Switch and Pitot Tubes with good quality using latest technology to suit the customers’ requirements. Our highly qualified engineer manufactures these Flow Meters, Flow Indicator and Flow Measuring Instruments using the best quality raw materials and latest technology.
• Flow Switch (Vane Type):
Our company designs and manufactures Flow Switch, which is the target type unit. It works on the magnetic principle of attraction. As the flow causes the flapper to deflect the magnet moves either closer to or farther away from the switch causing the reed switch to actuate. Switching action is determined by flow & not by pressure. The unique features of reed switch technique is adopted unique design, magnetic switching and uncompromised quality have resulted unparallel reliability.
• Flow Switch (Globe Type):
Our company is a leading designer and manufacturer of excellent Globe type flow switches, which are reliable control device for signaling high or low flow condition in a process system. These are designed on variable area principle and hence, its accuracy and reliability is fully assured.
• Rotameter:
Our company is a sole designer, manufacturer, exporter and wholesaler of noble quality Rotameter, which is a simplest form of fluid measuring instrument. This product consists of a borosilicate tapered glass tube placed vertically with its smaller diameter at the bottom. The float used in the tube is made up of heavier non-corrosive substance which resists the vertical flow of the fluid passing through the annular space between the tube and the head of float.
The fluid passing through the orifice, balances the weight of the float in the metered fluid and in equilibrium position, indicates the flow rate of the fluid against a calibrated external scale fitted by the side of the tube. Rota meters are used for rate of flow measurement of fluids or gases inline or in bye Pass lines. These are individually calibrated for the required parameters and so are quite accurate (2%). It is the most economical means for the measurement of flow rate in any pipeline.
Our range includes
• Glass Tube Rota meter
• Acrylic Body Rotameter
• Low Range Glass Tube And Acrylic Body Rotameter With control valve
• Bye-Pass Rotameter
Acrylic Body Rotameter
RCS-A,B,C- Series
• Meter Body : Acrylic
• Float : SS-316, PTFE, PVC
• Wetted Parts : S.S, PVC, PTFE & PP
• O-Rings : Neoprene, PTFE, Silicon
• Scale : Engraved on Body
• Temp Rating : 70° C
• Connection : Threaded BSP Female or Male
• Accuracy of Full Scale : 3%-5%,
Reeshar Acrylic Rotameter designs are unique for industrial usages. The essential working part is a Tapered flow tube precision machined inside the Acrylic body. When flow occurs, the position of a float within the tube indicates flow rates on a calibrated scale engraved on the Acrylic body. With integral construction, a needle valve and flow ports are built into the acrylic body, resulting in a very compact design. The unique front plate designs are the beauty of any panel where the meter is installed.
Descriptions:
Meter Body : Acrylic
Float : SS-316, PTFE and PVC
Wetted Parts : S.S, PVC, PTFE & PP
Packing : Neoprene, PTFE and Silicon
Scale Length : 170-225 mm
Temp Rating : Up-TO 70°C
Connection : Threaded BSP Female or Male
Accuracy of Full Scale : ±2% OF FULL SCALE
Repeatability : 0.50%
Rangeability : 10:01
• Sight Glass Indicator:
The model sf-100 is a flanged/screwed sight flow indicator with a cast/fabricated body. The Sight Flow Indicator provides visual observation and monitoring of the process flow stream. Available devices to enhance visibility include flapper and rotator. Bodies are available in bronze, iron, steel and stainless steel. Special alloys are also available. Standard units are available in 150#, 300# and 600# ANSI ratings.
|